 |
 |
 |
|
Actisense A2K-TER-U NMEA2000 Smart Universal Micro Terminator
The ideal solution for accurately monitoring the voltage on an NMEA 2000 network
The TER-U acts as an intelligent diagnostic terminator providing instant feedback as to the state of the voltage on your NMEA2000 bus. It is also a universal terminator, allowing it to be used either in-line, for applications at the top of masts,or at either end of the NMEA2000 bus as a regular terminator. Use the blanking caps supplied to keep the unused connectors clean. It has a built-in, high accuracy voltage monitoring circuit which continuously checks the bus voltage, and will illuminate its internal LEDs when it detects that the bus voltage is of the correct polarity. In addition, when it detects that the voltage is within the minimum required range, it will indicate ‘GREEN’ immediately, providing continuous valuable feedback as to the state of the bus voltage. If the voltage falls below the minimum required level of 9.0V, then the LED’s will illuminate ‘RED’, showing there is a potential problem with the NMEA 2000 bus power. Similarly, if the LED’s do not illuminate at all, this would indicate that there was no power or that the polarity was incorrect. This monitoring function happens continuously and remains permanent. Because these terminators are illuminated, they instantly provide feedback that the terminator is actually present (i.e. able to identify that there are two terminators present) – especially helpful in difficult-to-reach locations.
This smart universal micro-terminator can be used as either a male or female terminator or even as a feed through terminator for applications at the top of masts, making it truly universal
Actisense A2K-TER-U Smart Universal Micro Terminator
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features & Benefits
- Universal Terminator; can be used in-line or at bus end.
- Diagnostic LED to quickly determine any power issues of your bus.
|
|
|
|
|
|
|