|
|
|
|
|
|
|
|
|
|
|
|
|
|
A2K-4WD NMEA 2000 Drop Cable Assembly with Micro 4-way Drop. Quick and easy to install as a single T-piece, uses less space than four individual T-pieces and costs less than three.
|
A2K-4WT NMEA 2000 Connector Micro 4-way T piece. Quick and easy to install as a single T-piece, uses less space than two individual T-pieces and costs less than three.
|
The A2K-BULK-100M is a reel with 100m UL certified high quality NMEA2000 cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The A2K-COVER-20-F is a protective cover for NMEA2000 female micro connectors.
|
The A2K-COVER-20-M is a protective cover for NMEA2000 male micro connectors.
|
The A2K-FFC-RF Micro Field Fit Connector is a right-angle female NMEA2000 connector.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The A2K-FFC-RM Micro Field Fit Connector is a right-angle male NMEA2000 connector.
|
The A2K-FFC-SF Micro Field Fit Connector is a straight female NMEA2000 connector.
|
The A2K-FFC-SM Micro Field Fit Connector is a straight male NMEA2000 connector.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The A2K-GCF-0M25 is an NMEA2000 Micro Gender Changer Cable Assembly with female connectors.
|
The A2K-GCF-0M25 is an NMEA2000 Micro Gender Changer Cable Assembly with female connectors.
|
The Actisense A2K-KIT-1 is the ideal tool for starting a NMEA2000 network. Includes power drop, 2 T-pieces, terminators and 2m cable assembly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Actisense A2K-KIT-2 is the ideal tool for starting a NMEA2000 network. Includes power drop, 2 T-pieces, terminators and 6m cable assembly.
|
The A2K-KIT-3 Reduced STARTER KIT is an ideal solution for RIB users that wish to install an NMEA 2000 network.
|
The Actisense A2K-MPT-1 NMEA2000 Micro Power Tap comes with micro male and female connectors, 3m UL certified cable and left and right power feed pairs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The flexible Panel Mount Wired (PMW) connectors allow NMEA 2000 installations through watertight bulkheads (or panels) to be achieved.
|
The flexible Panel Mount Wired (PMW) connectors allow NMEA 2000 installations through watertight bulkheads (or panels) to be achieved.
|
The A2K-SBN-1 4-WAY SMALL BOAT NETWORK is a complete NMEA 2000 backbone in a single device. A complete network for four devices with internal terminators and power feed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The A2K-SBN-2 8-WAY SMALL BOAT NETWORK is a complete NMEA 2000 backbone in a single device. A complete network for eight devices with internal terminators and power feed.
|
The A2K-T-MFF is a NMEA2000 Micro T-Piece Connector, for use where a drop or ‘port’ is required from the NMEA 2000 backbone to connect another device.
|
The A2K-TDC-0.25M is a dual-ended 0.25m cable assembly which ensures quick installation, using Actisense UL certified cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The A2K-TDC-0M5 is a dual-ended 0.5m cable assembly which ensures quick installation, using Actisense UL certified cable.
|
The A2K-TDC-10M is a dual-ended 10m cable assembly which ensures quick installation, using Actisense UL certified cable.
|
The A2K-TDC-1M is a dual-ended 1m cable assembly which ensures quick installation, using Actisense UL certified cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The A2K-TDC-2M is a dual-ended 2m cable assembly which ensures quick installation, using Actisense UL certified cable.
|
The A2K-TDC-3M is a dual-ended 3m cable assembly which ensures quick installation, using Actisense UL certified cable.
|
The A2K-TDC-4M is a dual-ended 4m cable assembly which ensures quick installation, using Actisense UL certified cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The A2K-TDC-5M is a dual-ended 5m cable assembly which ensures quick installation, using Actisense UL certified cable.
|
The A2K-TDC-6M is a dual-ended 6m cable assembly which ensures quick installation, using Actisense UL certified cable.
|
The A2K-TDC-8M is a dual-ended 8m cable assembly which ensures quick installation, using Actisense UL certified cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The A2K-TER-F is a NMEA2000 Micro Female Terminator, for use at each end of the NMEA 2000 backbone to ensure proper operation and signal integrity.
|
The A2K-TER-M is a NMEA2000 Micro Male Terminator, for use at each end of the NMEA 2000 backbone to ensure proper operation and signal integrity.
|
The A2K-TER-U is a NMEA2000 Smart Universal Micro Terminator, for use at each end of the NMEA 2000 backbone or in-line to ensure proper operation, signal integrity and diagnostics.
|
|
|
|
|
|
|
|
DB9-F
List Price: $15.00 Our Price: $14.00
|
|
|
|
|
|
|
|
Cable assembly with 9 Pin, D-type moulded connector (female)
|
DIN Rail Mounting Kit for EMU-1 and NBF-3.
|
DIN Rail Mounting Kit for USG-2.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Breathe new smart digital life into your old or new transducers, with this NMEA depth, speed & temperature digital signal processor ...
The Actisense™ Active Depth/Speed/Temperature module is the best solution for interfacing standard analogue transducers and NMEA 0183 compatible chart plotters, radars, and on-board laptop PC’s.
|
Breathe new smart digital life into your old or new transducers, with this NMEA depth, speed & temperature digital signal processor ...
The Actisense™ Active Depth/Speed/Temperature module is the best solution for interfacing standard analogue transducers and NMEA 0183 compatible chart plotters, radars, and on-board laptop PC’s.
|
Breathe new smart digital life into your old or new transducers, with this NMEA depth, speed & temperature digital signal processor ...
The Actisense™ Active Depth/Speed/Temperature module is the best solution for interfacing standard analogue transducers and NMEA 0183 compatible chart plotters, radars, and on-board laptop PC’s.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Actisense EMU-1 is a specialised analogue to NMEA 2000 Gateway which converts data from analogue engine senders into NMEA 2000. The EMU-1 enables NMEA 2000 display devices to monitor one or two engines on a vessel.
|
NBF-3 NMEA Buffer isolates & buffers NMEA 0183 data, driving multiple devices. Distributes up to 6 identical, amplified data streams from 1 source. Signals are buffered ensuring Listeners receive the right data voltage levels for consistent data quality.
|
Multiplex or Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multiplex or Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
NDC-4 Base unit pre-configured as AIS Multiplexer
|
Multiplex or Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
NDC-4 Base unit pre-configured as AIS Multiplexer, with USB cable.
|
Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Autoswitch allows connection of up to five NMEA (National Marine Electronics Association) inputs, and autoswitches them to its two fully isolated NMEA outputs.
NDC-4 Base unit pre-configured as Autoswitch.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multiplex or Autoswitch up to 4 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to four NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
NDC-4 USB version.
|
NDC-4 USB Cable to convert NDC-4 to NDC-4-USB
|
Robust & highly flexible NMEA 0183 Multiplexer. Cures inter-connectivity headaches! 5 NMEA 0183 inputs routable to any of 2 NMEA 0183 outputs. Serial & Ethernet ports. Creates highly customizable network. Bi-directional serial port & Ethernet port allow simple configuration & diagnostics with Actisense software.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Interface to NMEA 2000 with a fully functional bi-directional firewall gateway ...
The Actisense™ NMEA 2000 to PC Interface transfers NMEA 2000 messages to and from the NMEA 2000 bus using the Actisense Comms Dynamic Linked Library (DLL). This ensures that all Actisense certified PC software can send and receive pure NMEA 2000 data, without any translations getting in the way and changing the data.
|
NGT-1-USB NMEA 2000 to PC Gateway. Full bi-directional firewall gateway. Transfers NMEA 2000 messages to/from NMEA 2000 bus. Uses Actisense Comms Dynamic Linked Library (DLL). Ensures Actisense certified PC software sends & receives pure NMEA 2000 data; no translation errors or data change.
|
Hook up to NMEA 2000 now, whilst keeping your current NMEA 0183 devices ...
The Actisense™ NMEA 2000 to NMEA 0183 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.
Using the advanced configuration software it is simple to set up which data items you want translated between the two buses.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hook up to NMEA 2000 now, whilst keeping your current NMEA 0183 devices ...
The Actisense™ NMEA 2000 to NMEA 0183 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.
Using the advanced configuration software it is simple to set up which data items you want translated between the two buses. Pre-configured with AIS conversions.
|
Hook up to NMEA 2000 now, whilst keeping your current NMEA 0183 devices ...
The Actisense™ NMEA 2000 to NMEA 0183 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.
Using the advanced configuration software it is simple to set up which data items you want translated between the two buses. Raymarine SeaTalk NG version.
|
NGW-1 NMEA 2000 to 0183 Gateway; the easy way to link old and new data networks. Converts NMEA 0183 data into NMEA 2000 data and vice-versa. Advanced configuration software for simple setup which data items to translate between 2 buses. USB version.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Actisense NGX-1-ISO NMEA2000 Dual Gateway. Intelligent Gateway technology enables PC interfacing and NMEA data conversion.
|
Actisense NGX-1-USB NMEA2000 Dual Gateway. Intelligent Gateway technology enables PC interfacing and NMEA data conversion.
|
The Actisense OPTO-4 is a bi-directional NMEA 0183 (RS422) to RS232 Opto-Isolator Serial Adaptor Cable which provides a safe method of connecting an NMEA 0183 system to a laptop PC or any device with a standard RS232 9-pin port.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reverse the current trend and convert one or more USB ports into standard PC RS232 ports ...
|
Adaptable NMEA 0183 Buffer with two OPTO-isolated inputs and twelve ISO-DriveTM isolated outputs, making ground loops a thing of the past and keeping devices safe from damage.
|
Adaptable NMEA 0183 Buffer with two OPTO-isolated inputs and twelve ISO-DriveTM isolated outputs, making ground loops a thing of the past and keeping devices safe from damage.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PRO-BUF-2 Professional Type Approved Intellligent NMEA0183 Buffer. Two OPTO-isolated inputs and twelve ISO-Drive™isolated outputs.
|
Robust & highly flexible professional NMEA 0183 Multiplexer. Cures many inter-connectivity headaches! 8 NMEA 0183 inputs can be routed to any of 6 NMEA 0183 outputs. Creates a highly customizable network. Bi-directional serial port & Ethernet port for simple configuration & diagnostics. Screw terminals version.
|
A robust and highly flexible professional NMEA 0183 Multiplexer that cures many inter-connectivity headaches! Eight NMEA 0183 inputs can be routed to any of six NMEA 0183 outputs, providing a highly customisable network. A bi-directional serial port and an Ethernet port for simple configuration and diagnostics. PRO-MUX-1-BAS-S version with screwless terminals.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Actisense PRO-MUX-2 Professional Intelligent NMEA0183 Multiplexer. 8 Inputs, 6 Outputs. A robust and highly flexible NMEA 0183 platform that cures many inter-connectivity headaches!
|
Actisense PRO-NBF-1 Type Approved NMEA 0183 Buffer. Safely connect one Talker to six Listeners with full isolation
|
The PRO-NDC-1E can connect up to 5 NMEA 0183 Inputs to 2 Outputs, has NMEA0183 Ethernet data streaming functionality, auto-switching and Web-browser based configuration
|
|
|
|
|
|
|
|
|
|
|
RJ45-FFC
List Price: $15.00 Our Price: $14.00
|
|
|
|
|
Expand the connection options of an NMEA 0183 device, or create a flexible NMEA 2000 network with multiple drops and power distribution ...
This Actisense™ Quick Network Block (QNB-1) allows backbone networking connections to be made easy and fault-free on National Marine Electronics Association (NMEA) buses and networks.
|
Expand the connection options of an NMEA 0183 device, or create a flexible NMEA 2000 network with multiple drops and power distribution ...
This Actisense™ Quick Network Block (QNB-1) allows backbone networking connections to be made easy and fault-free on National Marine Electronics Association (NMEA) buses and networks.
|
RJ45-FFC Waterproof Ethernet Connector for use with NDC-5
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SeaTalk NG to NMEA2000 adaptor cable (drop). Only for purchase with Actisense NMEA2000 devices.
|
USB KIT USB To Serial Adapter for use with PRO range products
|
USBKIT-REG. USB To Serial Adapter for use with NDC-5
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connect your data network to your PC USB port with full electrical isolation...
The Actisense™ USG-1 interface is an easy, safe and low-cost method of connecting a marine NMEA 0183 system to a USB equipped PC. Whilst protecting the most vital and expensive devices in the NMEA 0183 system, it also creates a virtual serial port that allows connection to an NMEA 0183 (RS422) marine bus link.
|
The USG-2 USB to NMEA 0183 Gateway converts a USB port into a bi-directional serial port suitable for connecting to a marine standard NMEA 0183 data bus.
|
USG-2 USB Cable Spare shielded cable for connecting USG-2 to PC
|
|
|
|
|
|
|
|
|
|
|
|
|
The Actisense W2K-1 converts and transfers data from an NMEA 2000 network to any wireless device (e.g. laptop, tablet or Smartphone) connected to it via Wi-Fi.
|
|
|
