|
|
|
|
|
|
|
|
|
|
|
|
|
Multiplex or Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
|
Multiplex or Autoswitch up to 4 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to four NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
NDC-4 USB version.
|
Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Autoswitch allows connection of up to five NMEA (National Marine Electronics Association) inputs, and autoswitches them to its two fully isolated NMEA outputs.
NDC-4 Base unit pre-configured as Autoswitch.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multiplex or Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
NDC-4 Base unit pre-configured as AIS Multiplexer
|
Multiplex or Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
NDC-4 Base unit pre-configured as AIS Multiplexer, with USB cable.
|
NBF-3 NMEA Buffer isolates & buffers NMEA 0183 data, driving multiple devices. Distributes up to 6 identical, amplified data streams from 1 source. Signals are buffered ensuring Listeners receive the right data voltage levels for consistent data quality.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Expand the connection options of an NMEA 0183 device, or create a flexible NMEA 2000 network with multiple drops and power distribution ...
This Actisense™ Quick Network Block (QNB-1) allows backbone networking connections to be made easy and fault-free on National Marine Electronics Association (NMEA) buses and networks.
|
Hook up to NMEA 2000 now, whilst keeping your current NMEA 0183 devices ...
The Actisense™ NMEA 2000 to NMEA 0183 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.
Using the advanced configuration software it is simple to set up which data items you want translated between the two buses.
|
NGW-1 NMEA 2000 to 0183 Gateway; the easy way to link old and new data networks. Converts NMEA 0183 data into NMEA 2000 data and vice-versa. Advanced configuration software for simple setup which data items to translate between 2 buses. USB version.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NGT-1-USB NMEA 2000 to PC Gateway. Full bi-directional firewall gateway. Transfers NMEA 2000 messages to/from NMEA 2000 bus. Uses Actisense Comms Dynamic Linked Library (DLL). Ensures Actisense certified PC software sends & receives pure NMEA 2000 data; no translation errors or data change.
|
Interface to NMEA 2000 with a fully functional bi-directional firewall gateway ...
The Actisense™ NMEA 2000 to PC Interface transfers NMEA 2000 messages to and from the NMEA 2000 bus using the Actisense Comms Dynamic Linked Library (DLL). This ensures that all Actisense certified PC software can send and receive pure NMEA 2000 data, without any translations getting in the way and changing the data.
|
Breathe new smart digital life into your old or new transducers, with this NMEA depth, speed & temperature digital signal processor ...
The Actisense™ Active Depth/Speed/Temperature module is the best solution for interfacing standard analogue transducers and NMEA 0183 compatible chart plotters, radars, and on-board laptop PC’s.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Breathe new smart digital life into your old or new transducers, with this NMEA depth, speed & temperature digital signal processor ...
The Actisense™ Active Depth/Speed/Temperature module is the best solution for interfacing standard analogue transducers and NMEA 0183 compatible chart plotters, radars, and on-board laptop PC’s.
|
Connect your data network to your PC USB port with full electrical isolation...
The Actisense™ USG-1 interface is an easy, safe and low-cost method of connecting a marine NMEA 0183 system to a USB equipped PC. Whilst protecting the most vital and expensive devices in the NMEA 0183 system, it also creates a virtual serial port that allows connection to an NMEA 0183 (RS422) marine bus link.
|
Breathe new smart digital life into your old or new transducers, with this NMEA depth, speed & temperature digital signal processor ...
The Actisense™ Active Depth/Speed/Temperature module is the best solution for interfacing standard analogue transducers and NMEA 0183 compatible chart plotters, radars, and on-board laptop PC’s.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hook up to NMEA 2000 now, whilst keeping your current NMEA 0183 devices ...
The Actisense™ NMEA 2000 to NMEA 0183 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.
Using the advanced configuration software it is simple to set up which data items you want translated between the two buses. Raymarine SeaTalk NG version.
|
The Actisense EMU-1 is a specialised analogue to NMEA 2000 Gateway which converts data from analogue engine senders into NMEA 2000. The EMU-1 enables NMEA 2000 display devices to monitor one or two engines on a vessel.
|
DIN Rail Mounting Kit for EMU-1 and NBF-3.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hook up to NMEA 2000 now, whilst keeping your current NMEA 0183 devices ...
The Actisense™ NMEA 2000 to NMEA 0183 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 can convert NMEA 0183 data into NMEA 2000 data and vice-versa.
Using the advanced configuration software it is simple to set up which data items you want translated between the two buses. Pre-configured with AIS conversions.
|
Expand the connection options of an NMEA 0183 device, or create a flexible NMEA 2000 network with multiple drops and power distribution ...
This Actisense™ Quick Network Block (QNB-1) allows backbone networking connections to be made easy and fault-free on National Marine Electronics Association (NMEA) buses and networks.
|
The Actisense A2K-MPT-1 NMEA2000 Micro Power Tap comes with micro male and female connectors, 3m UL certified cable and left and right power feed pairs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adaptable NMEA 0183 Buffer with two OPTO-isolated inputs and twelve ISO-DriveTM isolated outputs, making ground loops a thing of the past and keeping devices safe from damage.
|
Adaptable NMEA 0183 Buffer with two OPTO-isolated inputs and twelve ISO-DriveTM isolated outputs, making ground loops a thing of the past and keeping devices safe from damage.
|
DIN Rail Mounting Kit for USG-2.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A2K-4WT NMEA 2000 Connector Micro 4-way T piece. Quick and easy to install as a single T-piece, uses less space than two individual T-pieces and costs less than three.
|
The A2K-SBN-1 4-WAY SMALL BOAT NETWORK is a complete NMEA 2000 backbone in a single device. A complete network for four devices with internal terminators and power feed.
|
The A2K-KIT-3 Reduced STARTER KIT is an ideal solution for RIB users that wish to install an NMEA 2000 network.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The USG-2 USB to NMEA 0183 Gateway converts a USB port into a bi-directional serial port suitable for connecting to a marine standard NMEA 0183 data bus.
|
Robust & highly flexible professional NMEA 0183 Multiplexer. Cures many inter-connectivity headaches! 8 NMEA 0183 inputs can be routed to any of 6 NMEA 0183 outputs. Creates a highly customizable network. Bi-directional serial port & Ethernet port for simple configuration & diagnostics. Screw terminals version.
|
A2K-4WD NMEA 2000 Drop Cable Assembly with Micro 4-way Drop. Quick and easy to install as a single T-piece, uses less space than four individual T-pieces and costs less than three.
|
|
|
