|
|
|
|
|
|
|
|
|
|
|
|
|
|
A2K-4WD NMEA 2000 Drop Cable Assembly with Micro 4-way Drop. Quick and easy to install as a single T-piece, uses less space than four individual T-pieces and costs less than three.
|
A2K-4WT NMEA 2000 Connector Micro 4-way T piece. Quick and easy to install as a single T-piece, uses less space than two individual T-pieces and costs less than three.
|
The A2K-KIT-3 Reduced STARTER KIT is an ideal solution for RIB users that wish to install an NMEA 2000 network.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Actisense A2K-MPT-1 NMEA2000 Micro Power Tap comes with micro male and female connectors, 3m UL certified cable and left and right power feed pairs.
|
The A2K-SBN-1 4-WAY SMALL BOAT NETWORK is a complete NMEA 2000 backbone in a single device. A complete network for four devices with internal terminators and power feed.
|
The A2K-SBN-2 8-WAY SMALL BOAT NETWORK is a complete NMEA 2000 backbone in a single device. A complete network for eight devices with internal terminators and power feed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DIN Rail Mounting Kit for EMU-1 and NBF-3.
|
DIN Rail Mounting Kit for USG-2.
|
The Actisense EMU-1 is a specialised analogue to NMEA 2000 Gateway which converts data from analogue engine senders into NMEA 2000. The EMU-1 enables NMEA 2000 display devices to monitor one or two engines on a vessel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FB-10 Access Controller switches easily between on-board internet connection gateways such as VSAT, FBB, Iridium, 3G and WIFI at the click of a button. Whether you run a merchant ship or a luxury yacht, this control can save you both time and money.
|
FB-10 Pro Access Controller switches easily between on-board internet connection gateways such as VSAT, FBB, Iridium, 3G and WIFI at the click of a button. Whether you run a merchant ship or a luxury yacht, this control can save you both time and money.
|
KEP Marine’s KEPC-15 is a ruggedized 15" marine display designed for the commercial marine industry and is the ideal solution for pilot house/bridge applications
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
KEP Marine’s KEPC-17 is a ruggedized 17" marine display designed for the commercial marine industry and is the ideal solution for pilot house/bridge applications
|
KEP Marine’s KEPCGB-17 glass bridge display allows maximum screen size in the smallest spaces available. This rugged display has been developed to withstand the harsh conditions of the commercial marine industry. It is ideal for helms with limited space and can be mounted side by side to save even more precious space.
|
KEP Marine’s KEPCGB-19T glass bridge Touchscreen display allows maximum screen size in the smallest spaces available. This rugged display has been developed to withstand the harsh conditions of the commercial marine industry. It is ideal for helms with limited space and can be mounted side by side to save even more precious space. KEP Marines unique dual-touch technology allows the use of 2 fingers to control the display.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The MarLiant IT network, made by Netwave Systems, is a NonStop Computing Platform specifically designed for the maritime industry, featuring a Single & Multi-user Windows environment using Client-Server Technology and Rapid Super Ring Single-Wire Network Topology.
|
MarLiant 8000AS-VG is a fully redundant RAID-6 Application Server
|
MarLiant 8000AS-VS is a partially redundant RAID-5 Application Server
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MarLiant ML8600 is a fully Wheel-mark approved, IEC 60945 certified, PoE network-switch for NonStop Computing in a Marliant On-board IT network.
|
MarLiant ML8610 Thin-Client workstation
|
MR PowerMax Tri-Band Mobile GSM/3G Repeater, 65dB Gain, 1000 sq.m. indoor coverage.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MR Tri-Band Mobile GSM/3G Repeater, 55dB Gain, 250 sq.m. indoor coverage.
|
NBF-3 NMEA Buffer isolates & buffers NMEA 0183 data, driving multiple devices. Distributes up to 6 identical, amplified data streams from 1 source. Signals are buffered ensuring Listeners receive the right data voltage levels for consistent data quality.
|
Multiplex or Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multiplex or Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
NDC-4 Base unit pre-configured as AIS Multiplexer
|
Multiplex or Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
NDC-4 Base unit pre-configured as AIS Multiplexer, with USB cable.
|
Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Autoswitch allows connection of up to five NMEA (National Marine Electronics Association) inputs, and autoswitches them to its two fully isolated NMEA outputs.
NDC-4 Base unit pre-configured as Autoswitch.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multiplex or Autoswitch up to 4 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to four NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
NDC-4 USB version.
|
Robust & highly flexible NMEA 0183 Multiplexer. Cures inter-connectivity headaches! 5 NMEA 0183 inputs routable to any of 2 NMEA 0183 outputs. Serial & Ethernet ports. Creates highly customizable network. Bi-directional serial port & Ethernet port allow simple configuration & diagnostics with Actisense software.
|
Interface to NMEA 2000 with a fully functional bi-directional firewall gateway ...
The Actisense™ NMEA 2000 to PC Interface transfers NMEA 2000 messages to and from the NMEA 2000 bus using the Actisense Comms Dynamic Linked Library (DLL). This ensures that all Actisense certified PC software can send and receive pure NMEA 2000 data, without any translations getting in the way and changing the data.
|
|
|
