Actisense NGX-1-ISO NMEA2000 Dual Gateway

Intelligent Gateway technology enables PC interfacing and NMEA data conversion

---

Full control and visibility of your vessel data using the NGX-1

The NGX-1 is an intelligent multi-function gateway, combining the power of our two previous generation products (NGT-1 and NGW-1) into one, cost effective, flexible product. Configure the NGX-1 to operate as an NMEA 2000 <–> PC interface, or as a bi-directional NMEA 0183 <–> NMEA 2000 conversion gateway. View all NMEA 2000 network data on Actisense NMEA Reader. The device supports every available PGN in the NMEA 2000 standard. View converted NMEA 0183 data on Actisense NMEA Reader. The device sports the largest conversion library of any gateway. Easily interface with a wide range of PC applications via the NGX-1, such as TimeZero (NMEA 2000) and OpenCPN (NMEA 0183). Configure the Actisense EMU-1, NGW-1 and NGX-1 via Actisense Toolkit using an NGX-1. Connect legacy NMEA 0183 instruments together with new NMEA 2000 networks, greatly reducing upgrade costs. Equipped with a bare wire open ended cable, allowing for connectivity to an NMEA 0183 device, or Serial Port / DB-9.

• Power Supply (NGX-1-ISO / NGX-1-USB)
• Supply Voltage (NMEA 2000 Port) 9 to 30V DC
• Supply Current (NMEA 2000 Port) 62mA @ 9V DC
• Load Equivalent Number (LEN) 2
• Power Supply (USB Variants)
• Supply Voltage (NMEA 2000 Port) 9 to 30V DC
• Supply Current (USB Host Port) 10mA @ 5V DC
• Supply Current (NMEA 2000 Port) 62mA @ 9V DC
• Load Equivalent Number (LEN) 2
• NMEA 2000 Port (NGX-1-ISO / NGX-1-USB)
• Speed / Baud Rate 250kbps
• Connectivity M12 Male (A coded)
• ISO Port (NGX-1-ISO)
• Compatibility Full NMEA 0183, RS232 & RS422 compatibility. RS485 Listener compatible
• Speed/Baud Rate 4800 to 230400 Baud
• Output Voltage Drive >= 2.1V (differential) into 100Ω
• Output Current Drive 20mA max.
• Output Protection Short circuit and ESD
• Input Voltage Tolerance -15V to +15V continuous -35V to +35V short term (< 1 second)
• Input Protection Current limited and overdrive protection to 40VDC
• Connectivity 5mm stripped and tinned wire
• Cable Length 0.75m
• USB Port (USB Variant)
• Compatibility USB 1.1, 2.0 and 3.0
• Speed / Baud Rate 4800 to 230400 Baud
• Connectivity Male type A plug moulded onto cable
• Cable Length 1.8m
• Isolation
• NMEA 2000 Port to ISO Port Uses IsoDriveTM, Hi-Pot tested to 1000V
• NMEA 2000 Port to USB Port Galvanic Isolation, Hi-Pot tested to 1000V
• Mechanical
• Housing Material Body Flame retardant Polycarbonate
• Housing Material End Caps Flame retardant PBT
• Weight NGX-1-ISO 112g
• Weight NGX-1-USB 113g
• Approvals and Certifications
• NMEA 2000 NMEA 2000 Certified
• NMEA 0183 Meets IEC 61162-1 & 61162-2 Requirements
• RoHS and REACH Compliant
• Module Certification KCC / BQB / IC / Wi-Fi / NCC / MIC / FCC DSS / FCC DTS / SRRC / CE
• EMC EN 60945:2002 Edition 4 (section 9.3)
• EN 301 489-1 V2.2.3
• EN 301 489-17 V3.2.4
• EN 300 328 V2.2.2 Radiated Spurious Emissions
• FCC Part 15b
• ICES-003 Iss 7
• Environmental Protection IP68
• Operating Temperature -25°C to +70°C
• Storage Temperature -30°C to +70°C
• Recommended Humidity 0 to 93% RH @ 40°C
• Guarantee 3 years, extended to 5 years upon registration

Sends and receives pure NMEA 2000 data
Configure and flash-update Actisense products on the NMEA 2000 bus
Use with NMEA Reader to help diagnose network problems
Provides a rule-enforcing firewall between a PC and an NMEA 2000 bus
NGX-1-USB and NGX-1-ISO versions available to suit all installations
Upgrade NMEA 0183 equipment to NMEA 2000
Allow NMEA 0183 devices to receive vital NMEA 2000 data
Configure using Toolkit