 |
Features & Benefits
- The NGT-1 works in partnership with specialist PC software to allow viewing and/or sending of data to and from the NMEA 2000 bus. It can also be used with the Actisense configuration utility to re-configure any Actisense NGW-1 units that are on the bus - acting as the master remote control node.
- The new Actisense NMEA Reader software utility can now be downloaded from this page. This utility allows the NGT-1 user to view and understand (in detail) the NMEA 2000 messages.
- The Actisense NGT-1 has not been designed to work directly with standard NMEA 0183 software. If NMEA 2000 to NMEA 0183 translation is required, the Actisense NGW-1 has been designed for this operation.
- NGT-1-USB: Standard option - full USB (1.1 & 2.0) interface for bi-directional connection to a PC.
- Normally for use with new NMEA 2000 chartplotter software or similar that has been certified as compatible with the NGT-1. Full galvanic Opto-isolation is provided for superior protection of the PC's USB port. Thus full isolation is maintained between the PC input and output and the NMEA 2000 CAN bus connections.
- Simple to use, the NGT-1 is provided with all required cabling, and also incorporates screw terminal connectors within the case to allow customer specific wiring to be used (if required).
|
|
|