 |
The SAILOR 6391 Navtex System sets new standards in functionality and flexibility for SOLAS mandated Navtex receivers. As a black box system, with separate touch screen user-interface, it introduces a new approach that enhances safety and efficiency, whilst being fully SOLAS compliant. It is a next generation system offering new installation and operation possibilities today, with the potential to become part of the fully networked bridge in the future.
The SAILOR 6391 Navtex System consists of the SAILOR 6390 Navtex Receiver,
which receives Navtex messages on the international Navtex frequencies 490 kHz, 518 kHz and 4209.5 kHz, and the SAILOR 6004 Control Panel, a 7” touch screen that provides excellent viewing clarity in all light conditions so all messages can be seen and understood. Modular design means that the receiver can be installed anywhere on board whilst the control panel can be
placed anywhere on the bridge. They are linked by dual LAN (NMEA also included), so communication between the two is highly reliable, but installation is incredibly flexible.
Whilst the SAILOR 6390 Navtex Receiver can also be used as a standalone receiver and networked with any Integrated Navigation System (INS), the benefits of the SAILOR 6004 Control Panel is that it can also be used for other devices on the network, including the SAILOR 628x AIS System. It is a true multifunction display, with a familiar touch screen interface, where the user simply selects the app icon required for access and control of the
device chosen. By enabling operation of different devices, the SAILOR 6004 Control Panel offers cost-efficiencies whilst making operation easier, and therefore, safer.
The networking aspects of the SAILOR 6391 Navtex System are based on the open ThraneLINK protocol developed in-house at Cobham SATCOM. Over the top of this is the Thrane Management Application (TMA), a tool that enables engineers to access the network and all devices on it from a single point, which makes maintenance and software upgrades easy and more cost-efficient.
The system can even be accessed remotely from shore, making it a pioneering
product of the truly connected maritime safety world.
SAILOR products are world-renowned for their quality, reliability, robustness and user friendliness. They support safety by enabling communication in any conditions. Designed 100% in-house, the SAILOR 6391
Navtex System has all of these qualities, so you can be confident in your ability to receive all relevant Navtex messages, wherever you are in the world. Choosing the SAILOR 6391 Navtex System gives you unique features and benefits.
Including:
SAILOR 6390 Navtex Receiver
SAILOR 6004 Control Panel
- Power cable
- Mounting Bracket
- Mounting screws
- Flush Mount kit
- Installation Guide
- Test sheet
- ThraneLINK enabled
- TECHNICAL SPECIFICATIONS
- Navtex Receiver 490 kHz, 518 kHz and 4209.5 kHz simultaneous reception
- SW updatable to future 500 kHz NAVDAT
- Support for both active and passive antenna
- (12V@60mA antenna supply)
- Weight 1.3 kg
- Temperature -15°C to 55°C - Operational -15°C to 55°C - Storage
- Sensitivity 490-518 kHz - 12dBuV@10ohm/150pF - 6dBuV@50ohm 4209,5 kHz - 12dBuV@10ohm/150pF - 6dBuV@50ohm
- Excellent interference rejection and blocking immunity
- POWER SUPPLY AND CONSUMPTION
- DC input range (isolated) 12 to 24VDC nominal supply voltage (10.8 - 31.2VDC)
- Typical power consumption Typical 6.5W
- INTERFACE
- Relay for alarm output
- TNC antenna connector
- Dual LAN interface (RSTP support)
- Remote on/off
- NMEA0183 INS Support (in/out)
- NMEA0183 GPS input (or GPS input via LAN)
- Printer support via LAN
- 600ohm audio interface for e.g. troubleshooting
- NMEA SENTENCES
- NMEA0183 input, EN61162-1 (ACK ,NRM and CRQ sentences)
- NMEA0183 output, EN61162-1 (ALR, NRM and NRX sentences)
- GPS input, RMC, ZDA sentences
- Furthermore proprietary NMEA sentences (which will be enclosed in the manual)
- SOFTWARE FEATURES
- Navtex message sorting and filtering
- Software upgradable with TMA (Thrane Management Application)
- Validation of RF-reception by LED (and network status)
- Self-test validation by LED (and network status)
- SAILOR 6004 CONTROL PANEL
- Mounting method Flush mount or bracket
- Voltage 10.8 to 31.2 V DC
- Power consumption Typical: 18 W active Peak: 42 W
- 3.15 A internal fuse (non-serviceable)
- Audio output Up to 6 W in 8 Ohm
- Interfaces 2 x Ethernet (10/100 Mbit/s), Accessories connector,
- Auxiliary connector
- Compliance IEC 60945, IEC 60950-1
- IP rating IP54
- Ambient temperature -15°C to 55°C
- Storage temperature -30°C to 80°C
- Compass safe distance 0.6 m
- Dimensions W x H x D 191 mm x 145 mm x 61 mm (without mounting bracket)
- Weight 1.1 kg (1.25 kg with mounting bracket)
|
|
|