SeaPro Lite - PC Charting & Navigation Software

---

Simple, Easy to Use, Low Cost!

Electronic chart plotting has never been more affordable or simpler than with SeaPro Lite+. This easy-to-use system combines high quality charts with practical navigation functionality. SeaPro Lite+ is designed for those who wish to get to grips with PC based chart plotters without the initial expense of a fully featured system, or feel that the amount of sailing they do does not justify a more costly solution. Choose from a full range of Livechart packs or add the Navionics module to use your own Navionics Gold & Platinum cards simultaneously with your plotter. SeaPro lite+ in addition to Livecharts supports BSB/BSB4 raster charts and S57. (including S63 encoded versions AVCS/Primar etc)

Setup & Operating	Simple set up - Just connect your GPS to the serial port of your PC to see your vessels position on the chart. Folio Mode - Charts may be selected manually or you can allow the system to choose the appropriate charts for you. Route Planning and Monitoring - Position way-points easily by clicking the mouse button or edit them manually for precise positioning. 'On Route' information includes bearing and distance to next waypoint. All routes can be saved and re-used as required. Extended Track Line - Shows your boat's position at 30 and 60 minutes based on current speed and course. Flashing light sequences. (on vector charts as available)
Add-ins	Uses high quality Livechart vector charts - Livecharts are mainly derived directly from S57 data provided from the Hydrographic offices - so no problems of manual digitization from paper charts. seaPro lite+ support for muliple chart formats including S57, both encrypted (AVCS, Primar, Australian HO) and unencrypted cells, raster formats such as BSB/BSB4. Seamless changes between the different formats - allow seaPro lite+ to automatically choose the best scaled. Navionics chart option - with this 'add on' use your own Navionics charts (Gold and Platinum) - currently not available. Tidal Curves - view the tidal heights for most of the major and minor ports in the world. (requires purchase of optional tidal database)
Tools	Chart zoom & panning tools - move around charts quickly and easily. Measure Tool - Measure distances and bearings quickly. Dockable Toolbars - Place your toolbars where you need them, either on the chart or neatly stowed at the top or bottom of the screen. Chart Overlay - add your own marks, text, lines,areas for favorite fishing,anchoring or diving sites etc.
Interfacing	AIS - when connected to an AIS receiver or AIS transponder (class A or B) see information on other AIS equipped vessels (General AIS information). NAVTEX - support for the dual frequency NAVTEX receiver gives free Marine weather forecasts and other information. Autopilot Control - Once a route has been created, information can be sent to the NMEA0183 compatible autopilot allowing it to steer to each waypoint. GPS - Support for multiple serial ports or GPS/AIS data via a wired/wireless ethernet connection (TCP/IP).

Tidal Curves	Navtex	NMEA

• Windows PC Software.
• Compatible with Windows 7, 8.1 and 10.

	Minimum System Requirements	Recommended	S57
Operating System (Note 1)	Windows/XP/Vista//Win 7,8.1 and Windows 10	Windows 10	Windows 7/10
Processor	I3 or I5 1.8 GHz Note:Lower spec such as Atom/Celeron will work but slowly.	I3 or I5 1.8GHz or better	I5/I7 2.0GHz or better
RAM (Note 2)	4 GByte (512 MBytes XP)	4 GByte or more	4 GByte or more
Free Hard Disk Space	5 GByte - Amount depends on number of charts required and type	Solid State disk (SSD) drive recommended	SSD drive
Serial Ports (Note 3)	1 x (or USB to serial converter)
USB Ports	1 x for security dongle
Graphics Display (Note 4)	1024x600 16bit colors	1024x758 or better accelerated graphics card	Accelerated graphics chip either separate of built into a modern processor.
Miscellaneous	Internet conection for downloads/updates (can use USB drive instead) DVD drive is not normaly required unless taking ARCS/S57chart data on CD/DVD

Note 1: Windows XP - This operating system is no longer supported by Microsoft, so continued operation can't be guaranteed. Whichever operating system is being used, its presumed that the latest service packs have been applied plus any other appropriate updates/patches (for XP this means SP3 and for Vista SP2).
Note 2: Whichever operating system is being used, its presumed that the latest service packs have been applied plus any other appropriate updates/patches (for XP this means SP3 and for Vista SP2). The minimum level depends on your operating system requirements. For example XP will work with 512 MBytes, Vista should have at least 1GByte. If your computer is suitable for the specified operating system then it should be fine with seaPro - More memory is better.
Most modern computer\laptops will meet the specifications for all of the above.
Note3: Most laptops don't have a serial port,so add a USB/serial converter if GPS input required. Alternatively use TCP/IP input (via converter). Some equipment such as USB AIS unit have a driver that installs a virtual serial port.
Note 4: At 1024x 600 resolution (as used on Netbooks) the important dialog will operate correctly, some advanced features may require slight scrolling.
Note 5:seaPro will work with both 32 and 64 bit Windows operating systems. A dual 32/64 bit dongle driver is supplied.

The above are recommended minimums especially with S57 and 3D, higher specifications will mean your PC will also work better with other/more applications and extend its useful life.